zhuli2@graphite-electrodes.cn

language

Zhufeng

Zhufeng

产品管理

全部
产品管理

Search

Hi

Contact us for more discounted prices!

Get free product quotes

Please submit your detailed requirements including size, quantity and technical indicators via the product‑specific inquiry form.

Home page

Packaging

[ standard packaging ]

The electrodes are placed on wooden pallets and firmly supported with high-quality steel straps for both land and sea transportation. The electrode joints are packed in Flat noodles boxes.

[ Preset packaging type ]

The assembled electrodes and connectors are packed in Flat noodles. The electrode connectors and sockets are protected with polyester caps. Keep the protective caps at both ends in place and undamaged, which can protect the threads from collision and other wear and tear.

Packaging

Packaging

Packaging

Operation Guidelines

Please refer to the user manual for proper handling, storage and installation to maximize the service life of carbon‑graphite products.

Note 1: Transportation

Note 1: Transportation

Graphite electrode should be covered with rain-proof tarpaulin in the process of transportation.

Note 2: Forklift Transport

Note 2: Forklift Transport

Be careful when transporting and pilling the electrodes with forklift and avoid collisions. One layer of goods at a time, notice the balance and alignment to avoid falling or breakage

Note 3: Loading Caution

Note 3: Loading Caution

When loading and unloading with forklift, additional wire rope must be used and steel wrapping tape can not be employed directly to fetch electrode.

Note 4: Storage Caution

Note 4: Storage Caution

Electrode should be stored in clean and dry place. When stocked in open area, it should be covered with rain-proof tarpaulin and the number of piling layers ought not to exceed four.

Note 5: Precautions Before Use

Note 5: Precautions Before Use

Electrodes should be dried next to electric furnace before using. The temperature should not exceed 120 °C and the time should not be less than 48 hours.

Note 6: Wrapping Tape Cutting

Note 6: Wrapping Tape Cutting

When using electrode, special tools should be employed to cut the steel wrapping tape, and crane should not be adopted to avoid bursting.

Note 7: Installation Caution

Note 7: Installation Caution

Please clean the electrode threads first before connection, then screw the nipple into one end of the electrode. Don't touch the thread, and don't put the joint directly into the working electrode on furnace.

Note 9: Hoisting Attention

Note 9: Hoisting Attention

Use revolved resilient hanger and put soft cushions under the electrode nipple to avoid breakage of thread.

Note 8: Electrode Thread Cleaning

Note 8: Electrode Thread Cleaning

Steel-wire ball, metallic brush or emery cloth is not allowed for cleaning electrode thread, but compressed air free of oil and water is available.

Note 10: Connection Caution

Note 10: Connection Caution

Before connecting, clean the screw thread of electrode with compressed air free of oil and water.

Note 11: Nipple Connection

Note 11: Nipple Connection

When connecting, the electrode is aligned with the center axis of the nipple to which is the connected.

Note 12: Tighten the Electrode

Note 12: Tighten the Electrode

Use special caliper to tight electrode according to rated torque by mechanical way, hydraulic pressure or wind pressure equipment should also be available.

Note 13: Electrode Clamp Position

Note 13: Electrode Clamp Position

Clamp holder should be placed out of the alarm line. (Note: clamp holder should not clamp at alarm line zone, or the middle of the electrode, as it is easy to cause the rupture of the electrode) Clamp holder and interfaces of the electrode must be cleaned regularly to keep good touch with electrode.

Note 14: Graphite Electrode Selection

Note 14: Graphite Electrode Selection

To avoid the electrode breakage, insulating materials should not be put into the furnace. The working current of electrode must be conformity with the allowable current of electrode in the instructions.

Note 15: Large Material Smelting

Note 15: Large Material Smelting

In order to avoid electrode breakage, put the large materials in lower part and small materials on the upper part.

Hebei Zhufeng New Material Technology Co., Ltd

If you need help, you can contact us

Contact us for professional solutions.

Phone/Wechat:

+86-18633650185

E-mail:

zhuli2@graphite-electrodes.cn

North Carbon Base, Handan City, Hebei Province

Request a Quote

We’ll contact you within 1 working day. Please check your email.

WhatsApp Us

We reply instantly, provide professional technical support and factory best price.

Powered by 300.cn | TAG | Privacy Policy

Business license